支持 Red Hat Enterprise Linux, CentOS, Scientific Linux, Debian, Ubuntu, FreeBSD, OpenBSD
您尚未登陆。 请选择登陆或是注册一个新账号。
iRedMail 开源邮件服务解决方案 » iRedMail 技术支持 » 新装的iredmail，客户端foxmail不能发送邮件只能收取邮件！
==== 必填信息。没有填写将不予回复 ====
- iRedMail 版本号：iRedMail-0.9.5-1
- 使用哪个数据库存储用户帐号（MySQL）：
- 使用的 Linux/BSD 发行版名称及版本号：centos6.8 32X
- 与您的问题相关的日志信息：
====
新装的iredmail，客户端foxmail不能发送邮件只能收取邮件！而且必须设置为SSL加密，不打钩则不能收邮件。在WEB端可以正常收发邮件！
最好不知怎样就搞定了！
好像是/etc/postfix/main.cf最后加：
mynetworks = 127.0.0.0/8 x.y.z.0/24 # ‘x.y.z.0’代表你公司IP段，前面有的就注销掉后加！
mynetworks_style = subnet
smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
最好不知怎样就搞定了！
好像是/etc/postfix/main.cf最后加：mynetworks = 127.0.0.0/8 x.y.z.0/24 # ‘x.y.z.0’代表你公司IP段，前面有的就注销掉后加！
mynetworks_style = subnetsmtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
这个配置及其危险，完全没有反垃圾策略，你的服务器将对垃圾邮件来者不拒。
Foxmail 无法发送邮件，有几种办法：
- 升级 foxmail 到最新版本。
- 弃用 foxmail，改用其它邮件客户端程序。
如果你有心搜索一下这个论坛，有问题的客户端程序无一例外都是 foxmail。
it 写道:最好不知怎样就搞定了！
好像是/etc/postfix/main.cf最后加：mynetworks = 127.0.0.0/8 x.y.z.0/24 # ‘x.y.z.0’代表你公司IP段，前面有的就注销掉后加！
mynetworks_style = subnetsmtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination
这个配置及其危险，完全没有反垃圾策略，你的服务器将对垃圾邮件来者不拒。
Foxmail 无法发送邮件，有几种办法：
- 升级 foxmail 到最新版本。
- 弃用 foxmail，改用其它邮件客户端程序。如果你有心搜索一下这个论坛，有问题的客户端程序无一例外都是 foxmail。
张工！那么我该怎么设置能正常收发邮件？我是新手，对iredmail不熟悉，现在公司赶着用，所以只能临时设置一下！，顺便问一下用域名或者公网IP访问邮箱服务器该怎么设置？收发邮件端口改为110，25或者加密的995，465又在哪设置？
再看一遍我的回复吧。。。
再看一遍我的回复吧。。。
张工！我把“smtpd_sasl_auth_enable = yes”原本注销的我重新启用后就可以用公网和域名收发的，现在的问题是我对收发邮箱的端口开发和修改是在哪个文件，现在是995收件，如何该为110.
还有我防火墙以前默认的80端口是指向邮箱的，现在公网IP地址默认80端口没有打开邮箱而是打开防火墙界面，如何修改？防火墙以前是没有443，现在加上映射443端口后可以正常访问邮箱服务器，但用http://****的形式就访问防火墙了！求解！！！
客户端尽量不要用 FOXMAIL 了，非要用就升级到它的最新版。
端口转发这个外人没法帮忙，你得自己调整防火墙规则了。
客户端尽量不要用 FOXMAIL 了，非要用就升级到它的最新版。
端口转发这个外人没法帮忙，你得自己调整防火墙规则了。
好的！谢谢！张工！如果我想同时使用110、25和SSL的995、465该在哪里设置修改？
好的！谢谢！张工！如果我想同时使用110、25和SSL的995、465该在哪里设置修改？
iRedMail 默认的端口号在文档里已经注明：
http://www.iredmail.com/docs/#mua
25 和 465 默认没启用，请用 587 端口发送邮件。
110， 143，993，995 都默认启用。
it 写道:好的！谢谢！张工！如果我想同时使用110、25和SSL的995、465该在哪里设置修改？
iRedMail 默认的端口号在文档里已经注明：
http://www.iredmail.com/docs/#mua25 和 465 默认没启用，请用 587 端口发送邮件。
110， 143，993，995 都默认启用。
张工，不好意思，我是新手，所以有许多东西都不大熟悉。是不是在/etc/postfix/main.cf和/etc/dovecot/dovecot.conf文件修改对应字段就可以了？如果是请把字段写一下！毕竟关联到收发邮件的。我找过几个资料都没有详细说明，所以我只能问清楚了！请多多包涵！
iRedMail 默认的端口号在文档里已经注明：
http://www.iredmail.com/docs/#mua
这几个注明的端口号都是在安装好 iRedMail 后就自动启用的，不需要修改配置文件。
iRedMail 默认的端口号在文档里已经注明：
http://www.iredmail.com/docs/#mua这几个注明的端口号都是在安装好 iRedMail 后就自动启用的，不需要修改配置文件。
张工，我又重装一次iredmail，登录界面：https://ip/mail/可以打开，但管理界面和sogo界面不能打开，显示“502 Bad Gateway“错误！
而/var/log/nginx/error.log显示：
2017/01/12 11:33:59 [error] 2588#2588: *3 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:33:59 [error] 2588#2588: *3 open() "/var/www/html/favicon.ico" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /favicon.ico HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:33:59 [error] 2588#2588: *3 open() "/var/www/html/favicon.ico" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /favicon.ico HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:34:03 [error] 2588#2588: *3 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:34:07 [error] 2588#2588: *3 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:34:33 [error] 2588#2588: *3 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:13 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:15 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:16 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:17 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:19 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:21 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:26 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:30 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:40:34 [error] 2588#2588: *10 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 11:45:28 [error] 2588#2588: *11 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 14:33:03 [error] 2588#2588: *12 open() "/var/www/html/iredmail" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /iredmail HTTP/1.1", host: "192.168.50.128"
2017/01/12 14:33:24 [crit] 2588#2588: *12 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 14:33:30 [crit] 2588#2588: *12 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 14:33:33 [crit] 2588#2588: *12 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 14:33:54 [error] 2588#2588: *12 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /SOGo/ HTTP/1.1", upstream: "http://127.0.0.1:20000/SOGo/", host: "192.168.50.128"
2017/01/12 16:21:34 [error] 2655#2655: *1 open() "/var/www/html/favicon.ico" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /favicon.ico HTTP/1.1", host: "192.168.50.128"
2017/01/12 16:21:38 [crit] 2655#2655: *1 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 16:21:41 [crit] 2655#2655: *1 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 16:22:22 [crit] 2655#2655: *1 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 16:29:33 [crit] 2655#2655: *65 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/12 16:29:47 [crit] 2655#2655: *11 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin/ HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
对应目录下没有：favicon.ico，iredmail和uwsgi_iredadmin.socket文件！
安装完成后是否重启过服务器？似乎 php-fpm 和 uwsgi 服务都没启动。
安装完成后是否重启过服务器？似乎 php-fpm 和 uwsgi 服务都没启动。
张工，我重启过电脑2次了，结果依旧，看哪个文档？我贴一下！
浏览器里面输入： https://192.168.50.128/iredadmin/
之后显示“502 Bad Gateway nginx”
/var/log/nginx文件内容：
2017/01/17 14:17:31 [crit] 2655#2655: *4311 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
2017/01/17 14:17:34 [crit] 2655#2655: *4311 connect() to unix:/var/run/uwsgi_iredadmin.socket failed (2: No such file or directory) while connecting to upstream, client: 192.168.50.128, server: _, request: "GET /iredadmin HTTP/1.1", upstream: "uwsgi://unix:/var/run/uwsgi_iredadmin.socket:", host: "192.168.50.128"
重启 uwsgi 服务。它的 log 文件位置可在以下文档找到：
http://www.iredmail.com/docs/file.locations.html
重启 uwsgi 服务。它的 log 文件位置可在以下文档找到：
http://www.iredmail.com/docs/file.locations.html
用命令：service uwsgi restart 后显示：uwsgi: 未被识别的服务
用命令：rpm -ql uwsgi* 显示：package uwsgi* is not installed
uwsgi不是安装iredmail时就安装的吗？现在是否重新安装？
安装后又要如何设置？
我用命令：yum install -y uwsgi后显示：
http://packages.inverse.ca/SOGo/nightly … epomd.xml: [Errno 14] PYCURL ERROR 6 - "Couldn't resolve host 'packages.inverse.ca'"
尝试其他镜像。
Skipping filters plugin, no data
0 packages excluded due to repository protections
No package uwsgi available.
错误：无须任何处理
命令：whereis uwsgi
显示：uwsgi: /etc/uwsgi.d /etc/uwsgi.ini
/etc/uwsgi.ini内容：
[uwsgi]
# Run in background and log to file
daemonize = /var/log/uwsgi/uwsgi.log
# try to autoload appropriate plugin if "unknown" option has been specified
autoload = true
# enable master process manager
master = true
# spawn 2 uWSGI worker processes
workers = 2
# automatically kill workers on master's death
no-orphans = true
# write master's pid in file
pidfile = /var/run/uwsgi.pid
# bind to UNIX socket file
socket = /var/run/uwsgi.socket
# set mode of created UNIX socket
chmod-socket = 660
# place timestamps into log
log-date = true
# user identifier of uWSGI processes
#uid = uwsgi
# group identifier of uWSGI processes
#gid = uwsgi
# multi-app deployment
emperor = /etc/uwsgi.d
emperor-tyrant = false
命令：yum remove uwsgi
显示：参数 uwsgi 没有匹配
Repository base is listed more than once in the configuration
Repository updates is listed more than once in the configuration
Repository extras is listed more than once in the configuration
Repository centosplus is listed more than once in the configuration
Repository contrib is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* base: mirrors.btte.net
* extras: ftp.sjtu.edu.cn
* updates: ftp.sjtu.edu.cn
SOGo | 951 B 00:00
SOGo/primary | 9.1 kB 00:00
SOGo 41/41
_local | 2.9 kB 00:00 ...
0 packages excluded due to repository protections
不删除任何软件包
如何解决？
如果使用 Nginx 服务，它会安装 php-fpm 和 uwsgi 程序／服务。但你的 log 显示没有 uwsgi，这个就不正常了。看一下 iRedMail-0.9.5-1/runtime/install.log （及 pkg.install.log），里头是否有相关的内容。
如果使用 Nginx 服务，它会安装 php-fpm 和 uwsgi 程序／服务。但你的 log 显示没有 uwsgi，这个就不正常了。看一下 iRedMail-0.9.5-1/runtime/install.log （及 pkg.install.log），里头是否有相关的内容。
张工：我查看了一下相关内容：
iRedMail-0.9.5-1/runtime/install.log
< SKIP > Function: check_new_iredmail.
+ < DEBUG > Creating necessary directories ...
< SKIP > Function: create_repo_rhel.
[ INFO ] Fetching source tarballs ...
[ INFO ] + 1 of 3: http://106.187.51.47/yum/misc/roundcube … ete.tar.gz
[ INFO ] + 2 of 3: http://106.187.51.47/yum/misc/iRedAPD-1.9.1.tar.bz2
[ INFO ] + 3 of 3: http://106.187.51.47/yum/misc/iRedAdmin-0.6.1.tar.bz2
[ INFO ] Validate packages ...
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] [NOT FOUND]
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://106.187.51.47/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://106.187.51.47/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://106.187.51.47/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://106.187.51.47/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://106.187.51.47/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://106.187.51.47/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Skip configuration file: /root/iRedMail-0.9.5-1/config.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Skip configuration file: /root/iRedMail-0.9.5-1/config.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
+ < DEBUG > Service control: enable rsyslog.
+ < DEBUG > Service control: enable postfix.
+ < DEBUG > Service control: enable mysqld.
+ < DEBUG > Service control: enable nginx.
+ < DEBUG > Service control: enable php-fpm.
+ < DEBUG > Service control: enable uwsgi.
error reading information on service uwsgi: No such file or directory
+ < DEBUG > Service control: enable dovecot.
+ < DEBUG > Service control: enable clamd.
error reading information on service clamd: No such file or directory
+ < DEBUG > Service control: enable amavisd.
error reading information on service amavisd: No such file or directory
+ < DEBUG > Service control: enable sogod.
+ < DEBUG > Service control: enable memcached.
+ < DEBUG > Service control: enable fail2ban.
+ < DEBUG > Service control: enable crond.
+ < DEBUG > Service control: disable exim.
error reading information on service exim: No such file or directory
+ < DEBUG > Service control: disable saslauthd.
+ < DEBUG > Service control: disable spamassassin.
+ < DEBUG > Service control: disable shorewall.
+ < DEBUG > Service control: disable gamin.
error reading information on service gamin: No such file or directory
+ < DEBUG > Service control: disable gamin-python.
error reading information on service gamin-python: No such file or directory
[ INFO ] Create self-signed SSL certification files (2048 bits).
[ INFO ] Generate Diffie Hellman Group with openssl, please wait.
[ INFO ] Create required system account: vmail, iredadmin, iredapd.
+ < DEBUG > Create HOME folder for vmail user.
+ < DEBUG > Create system account: vmail:vmail (2000:2000).
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
rm: cannot remove `/var/vmail/.': Is a directory
rm: cannot remove `/var/vmail/..': Is a directory
+ < DEBUG > Create directory to store user sieve rule files: /var/vmail/sieve.
+ < DEBUG > Create system account: iredadmin:iredadmin (2001:2001)
+ < DEBUG > Create system account: iredapd:iredapd (2002:2002).
[ INFO ] Configure Nginx web server and uWSGI.
+ < DEBUG > Setting logrotate for uwsgi log file: /var/log/uwsgi/uwsgi.log.
安装时显示： + < DEBUG > Service control: enable uwsgi.
error reading information on service uwsgi: No such file or directory
/var/log/uwsgi文件夹里面没有：uwsgi.log
pkg.install.log
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
Loaded plugins: aliases, auto-update-debuginfo, changelog, fastestmirror,
: filter-data, fs-snapshot, kabi, keys, list-data, local, merge-
: conf, ovl, post-transaction-actions, presto, priorities,
: protectbase, ps, refresh-packagekit, remove-with-leaves, rpm-
: warm-cache, security, show-leaves, tmprepo, tsflags, upgrade-
: helper, verify, versionlock
Loading support for CentOS kernel ABI
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.btte.net
* updates: mirrors.163.com
Skipping filters plugin, no data
0 packages excluded due to repository protections
Package 2:postfix-2.6.6-6.el6_7.1.i686 already installed and latest version
No package uwsgi available.
No package uwsgi-plugin-python available.
因该是安装时没有安装，正常安装我前面试过了，如何解决？
你贴的 log 都不是完整的，似乎被你删去了一部分，导致没法分析。
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.btte.net
* updates: mirrors.163.com
没有 EPEL 仓库，这个是问题所在。可在安装 iRedMail 前手工安装 "epel-release" 这个包。但 iRedMail 会在安装时自动添加，不清楚为何你的没有。
你贴的 log 都不是完整的，似乎被你删去了一部分，导致没法分析。
it 写道:Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* extras: mirrors.btte.net
* updates: mirrors.163.com没有 EPEL 仓库，这个是问题所在。可在安装 iRedMail 前手工安装 "epel-release" 这个包。但 iRedMail 会在安装时自动添加，不清楚为何你的没有。
张工！我不得不又重装一次系统，这次安装顺利能打开iredadmin和mail界面，但轮到phpmyadmin不能打开了！不过这个页面之前也无法打开，不过暂时不重要，现在我需要打开管理！
而/var/log/nginx/error.log内容：
2017/01/22 09:22:15 [error] 2449#0: *39 open() "/var/www/html/phpmyadmin" failed (2: No such file or directory), client: 192.168.50.128, server: _, request: "GET /phpmyadmin HTTP/1.1", host: "192.168.50.128"
/iredmail-0.9.5-1/runtime/install.log内容：
[ INFO ] Checking new version of iRedMail ...
+ < DEBUG > Creating necessary directories ...
[ INFO ] Preparing yum repositories ...
[ INFO ] Installing package(s): epel-release
[ INFO ] Fetching source tarballs ...
[ INFO ] + 1 of 3: http://173.254.22.21/yum/misc/roundcube … ete.tar.gz
[ INFO ] + 2 of 3: http://173.254.22.21/yum/misc/iRedAPD-1.9.1.tar.bz2
[ INFO ] + 3 of 3: http://173.254.22.21/yum/misc/iRedAdmin-0.6.1.tar.bz2
[ INFO ] Validate packages ...
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] [NOT FOUND]
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
<< ERROR >> Installation failed, please check the terminal output.
<< ERROR >> If you're not sure what the problem is, try to get help in iRedMail
<< ERROR >> forum: http://173.254.22.21/forum/
[ INFO ] Checking configuration file: /root/iRedMail-0.9.5-1/config ...
[ INFO ] Use config file: /root/iRedMail-0.9.5-1/config for mail server setting.
[ INFO ] Import installation process status from file: /root/iRedMail-0.9.5-1/runtime/install.status.
[ INFO ] Add yum repo for SOGo: /etc/yum.repos.d/sogo.repo.
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
+ < DEBUG > Service control: enable rsyslog.
+ < DEBUG > Service control: enable postfix.
+ < DEBUG > Service control: enable mysqld.
+ < DEBUG > Service control: enable nginx.
+ < DEBUG > Service control: enable php-fpm.
+ < DEBUG > Service control: enable uwsgi.
+ < DEBUG > Service control: enable dovecot.
+ < DEBUG > Service control: enable clamd.
+ < DEBUG > Service control: enable amavisd.
+ < DEBUG > Service control: enable sogod.
+ < DEBUG > Service control: enable memcached.
+ < DEBUG > Service control: enable fail2ban.
+ < DEBUG > Service control: enable crond.
+ < DEBUG > Service control: disable exim.
error reading information on service exim: No such file or directory
+ < DEBUG > Service control: disable saslauthd.
+ < DEBUG > Service control: disable spamassassin.
+ < DEBUG > Service control: disable shorewall.
error reading information on service shorewall: No such file or directory
+ < DEBUG > Service control: disable gamin.
error reading information on service gamin: No such file or directory
+ < DEBUG > Service control: disable gamin-python.
error reading information on service gamin-python: No such file or directory
[ INFO ] Create self-signed SSL certification files (2048 bits).
[ INFO ] Generate Diffie Hellman Group with openssl, please wait.
[ INFO ] Create required system account: vmail, iredadmin, iredapd.
+ < DEBUG > Create HOME folder for vmail user.
+ < DEBUG > Create system account: vmail:vmail (2000:2000).
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
rm: cannot remove `/var/vmail/.': Is a directory
rm: cannot remove `/var/vmail/..': Is a directory
+ < DEBUG > Create directory to store user sieve rule files: /var/vmail/sieve.
+ < DEBUG > Create system account: iredadmin:iredadmin (2001:2001)
+ < DEBUG > Create system account: iredapd:iredapd (2002:2002).
[ INFO ] Configure Nginx web server and uWSGI.
+ < DEBUG > Setting logrotate for uwsgi log file: /var/log/uwsgi/uwsgi.log.
[ INFO ] Configure PHP.
+ < DEBUG > Hide PHP Version in Apache from remote users requests: /etc/php.ini.
+ < DEBUG > Increase 'memory_limit' to 256M: /etc/php.ini.
+ < DEBUG > Increase 'upload_max_filesize', 'post_max_size' to 10/12M: /etc/php.ini.
+ < DEBUG > Disable php extension: suhosin. /etc/php.ini.
[ INFO ] Configure MySQL database server.
+ < DEBUG > Generate temporary defauts file for MySQL client option --defaults-file: /root/iRedMail-0.9.5-1/.mysql-root-defaults-file.
+ < DEBUG > Initialize MySQL server.
+ < DEBUG > Stop MySQL service before updating my.cnf.
+ < DEBUG > Service control: stop mysqld.
Stopping mysqld: [60G[[0;32m OK [0;39m]
+ < DEBUG > Disable 'skip-networking' in my.cnf.
+ < DEBUG > Enable 'innodb_file_per_table' in my.cnf.
+ < DEBUG > Service control: restart mysqld.
Stopping mysqld: [60G[[0;32m OK [0;39m]
Initializing MySQL database: Installing MySQL system tables...
OK
Filling help tables...
OK
To start mysqld at boot time you have to copy
support-files/mysql.server to the right place for your system
PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
To do so, start the server, then issue the following commands:
/usr/bin/mysqladmin -u root password 'new-password'
/usr/bin/mysqladmin -u root -h mail.uplink.net.cn password 'new-password'
Alternatively you can run:
/usr/bin/mysql_secure_installation
which will also give you the option of removing the test
databases and anonymous user created by default. This is
strongly recommended for production servers.
See the manual for more instructions.
You can start the MySQL daemon with:
cd /usr ; /usr/bin/mysqld_safe &
You can test the MySQL daemon with mysql-test-run.pl
cd /usr/mysql-test ; perl mysql-test-run.pl
Please report any problems with the /usr/bin/mysqlbug script!
[60G[[0;32m OK [0;39m]
Starting mysqld: [60G[[0;32m OK [0;39m]
+ < DEBUG > Sleep 10 seconds for MySQL daemon initialization ...
Database
information_schema
mysql
test
+ < DEBUG > Setting password for MySQL admin (root).
+ < DEBUG > Initialize MySQL database.
+ < DEBUG > Generating SQL template for postfix virtual hosts: /root/iRedMail-0.9.5-1/runtime/mysql_vmail.sql.
+ < DEBUG > Import postfix virtual hosts/users: /root/iRedMail-0.9.5-1/runtime/mysql_vmail.sql.
[ INFO ] Setup daily cron job to backup SQL databases with /var/vmail/backup/backup_mysql.sh
[ INFO ] Configure Postfix (MTA).
+ < DEBUG > Enable chroot.
+ < DEBUG > Enable submission and additional transports required by Amavisd and Dovecot.
+ < DEBUG > Copy: /etc/{hosts,resolv.conf,localtime,services} -> /var/spool/postfix/etc/
+ < DEBUG > Configure Postfix for SQL/LDAP lookup.
+ < DEBUG > Enable postscreen service.
<ERROR> postscreen requires Postfix 2.8 or later, you're running 2.6.6.
[ INFO ] Configure Dovecot (POP3/IMAP/Managesieve/LMTP/LDA).
+ < DEBUG > Configure dovecot: /etc/dovecot/dovecot.conf.
+ < DEBUG > Copy global sieve filter rule file: /var/vmail/sieve/dovecot.sieve.
+ < DEBUG > Create dovecot log file: /var/log/dovecot.log.
+ < DEBUG > Create dovecot log file: /var/log/dovecot-sieve.log.
+ < DEBUG > Create dovecot log file: /var/log/dovecot-lmtp.log.
+ < DEBUG > Enable dovecot SASL support in postfix: /etc/postfix/main.cf.
+ < DEBUG > Create directory for Dovecot plugin: Expire.
+ < DEBUG > Setting logrotate for dovecot log file.
[ INFO ] Configure ClamAV (anti-virus toolkit).
+ < DEBUG > Configure ClamAV: /etc/clamd.conf.
+ < DEBUG > Configure freshclam: /etc/freshclam.conf.
+ < DEBUG > Add clamav user to amavid group.
+ < DEBUG > Set permission to 750: /var/spool/amavisd/tmp, /var/spool/amavisd/quarantine,
[ INFO ] Configure Amavisd-new (interface between MTA and content checkers).
+ < DEBUG > Configure amavisd-new: /etc/amavisd/amavisd.conf.
+ < DEBUG > Generate DKIM pem files: /var/lib/dkim/uplink.net.cn.pem.
+ < DEBUG > Setting cron job for vmail user to delete virus mail per month.
+ < DEBUG > Import Amavisd database and privileges.
[ INFO ] Configure SpamAssassin (content-based spam filter).
+ < DEBUG > Copy sample SpamAssassin config file: /root/iRedMail-0.9.5-1/samples/spamassassin/local.cf -> /etc/mail/spamassassin/local.cf.
+ < DEBUG > Enable crontabs for SpamAssassin update.
[ INFO ] Configure iRedAPD (postfix policy daemon).
+ < DEBUG > Extracting: iRedAPD-1.9.1.tar.bz2 -> /opt
+ < DEBUG > Configure iRedAPD.
+ < DEBUG > Make iredapd start after system startup.
+ < DEBUG > Service control: enable iredapd.
+ < DEBUG > Import iRedAPD database template.
[ INFO ] Configure iRedAdmin (official web-based admin panel).
+ < DEBUG > Extracting: iRedAdmin-0.6.1.tar.bz2 -> /var/www
+ < DEBUG > Set correct permission for iRedAdmin: /var/www/iRedAdmin-0.6.1.
+ < DEBUG > Import iRedAdmin database template.
+ < DEBUG > Configure iRedAdmin.
+ < DEBUG > Configure general settings.
+ < DEBUG > Configure iredadmin database related settings.
+ < DEBUG > Configure SQL mail accounts related settings.
+ < DEBUG > Configure Amavisd related settings.
+ < DEBUG > Configure iRedAPD related settings.
[ INFO ] Configure Fail2ban (authentication failure monitor).
+ < DEBUG > Log into syslog instead of log file.
+ < DEBUG > Disable all default filters in /etc/fail2ban/jail.conf.
+ < DEBUG > Create Fail2ban config file: /etc/fail2ban/jail.local.
+ < DEBUG > Copy sample Fail2ban filter config files.
[ INFO ] Configure Roundcube webmail.
+ < DEBUG > Extracting: roundcubemail-1.2.0-complete.tar.gz -> /var/www
+ < DEBUG > Set correct permission for Roundcubemail: /var/www/roundcubemail-1.2.0.
+ < DEBUG > Import SQL database and privileges for Roundcubemail.
+ < DEBUG > Configure database for Roundcubemail: /var/www/roundcubemail-1.2.0/config/*.
+ < DEBUG > Setup daily cron job to keep SQL database clean.
+ < DEBUG > Config plugin: managesieve.
+ < DEBUG > Enable and config plugin: password.
[ INFO ] Configure SOGo Groupware (Webmail, Calendar, Address Book, ActiveSync).
+ < DEBUG > Service control: restart sogod.
Restarting SOGo:
[60G[[0;32m OK [0;39m]
sogo
+ < DEBUG > Mail sensitive administration info to .
+ < DEBUG > Set file permission to 0600: /var/spool/cron/root.
+ < DEBUG > Set file permission to 0600: /var/spool/cron/amavis.
+ < DEBUG > Set file permission to 0600: /var/spool/cron/sogo.
[ INFO ] Disable SELinux in /etc/selinux/config.
[ INFO ] Removing package(s): sendmail
[ INFO ] Copy firewall sample rules: /etc/sysconfig/iptables.
+ < DEBUG > Service control: enable iptables.
[ INFO ] Restarting firewall ...
+ < DEBUG > Service control: restart iptables.
iptables: Setting chains to policy ACCEPT: filter [60G[[0;32m OK [0;39m]
iptables: Flushing firewall rules: [60G[[0;32m OK [0;39m]
iptables: Unloading modules: [60G[[0;32m OK [0;39m]
iptables: Applying firewall rules: [60G[[0;32m OK [0;39m]
[ INFO ] Copy MySQL sample file: /etc/my.cnf.
[ INFO ] Enable SSL support for MySQL server.
[ INFO ] Updating ClamAV database (freshclam), please wait ...
+ < DEBUG > Send info of chosed packages to iRedMail team to help improve iRedMail:
+ < DEBUG >
+ < DEBUG > MYSQL=YES
+ < DEBUG > NGINX=YES
+ < DEBUG > APACHE=NO
+ < DEBUG > ROUNDCUBE=YES
+ < DEBUG > SOGO=YES
+ < DEBUG > AWSTATS=
+ < DEBUG > FAIL2BAN=YES
+ < DEBUG > IREDADMIN=YES
+ < DEBUG >
里面没有类似：phpMyAdmin的安装包
/iredmail-0.9.5-1/runtime/pkg.install.log内容：
[ INFO ] Installing package(s): postfix mysql-server mysql perl-DBD-MySQL php-common php-gd php-xml php-mysql php-ldap php-pgsql php-imap php-mbstring php-pecl-apc php-intl php-mcrypt nginx php-fpm dovecot dovecot-pigeonhole dovecot-managesieve amavisd-new spamassassin altermime perl-LDAP perl-Mail-SPF unrar pax clamd clamav-db php-pear-Net-IDNA2 sogo sogo-activesync libwbxml sogo-ealarms-notify sogo-tool sope49-gdl1-mysql python-sqlalchemy python-setuptools python-dns MySQL-python python-jinja2 python-webpy python-netifaces python-beautifulsoup4 python-lxml uwsgi uwsgi-plugin-python fail2ban mcrypt unzip bzip2 acl patch tmpwatch crontabs dos2unix logwatch
Loaded plugins: aliases, changelog, fastestmirror, kabi, ovl, presto, refresh-
: packagekit, security, tmprepo, verify, versionlock
Loading support for CentOS kernel ABI
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: mirrors.163.com
* epel: mirrors.tuna.tsinghua.edu.cn
* extras: mirrors.163.com
* updates: mirrors.aliyun.com
Package 2:postfix-2.6.6-6.el6_7.1.i686 already installed and latest version
Package mysql-server-5.1.73-7.el6.i686 already installed and latest version
Package mysql-5.1.73-7.el6.i686 already installed and latest version
Package perl-DBD-MySQL-4.013-3.el6.i686 already installed and latest version
Package spamassassin-3.3.1-3.el6.i686 already installed and latest version
Package pax-3.4-10.1.el6.i686 already installed and latest version
Package python-setuptools-0.6.10-3.el6.noarch already installed and latest version
Package python-lxml-2.2.3-1.1.el6.i686 already installed and latest version
Package unzip-6.0-4.el6.i686 already installed and latest version
Package bzip2-1.0.5-7.el6_0.i686 already installed and latest version
Package acl-2.2.49-6.el6.i686 already installed and latest version
Package patch-2.6-6.el6.i686 already installed and latest version
Package tmpwatch-2.9.16-6.el6.i686 already installed and latest version
Package crontabs-1.10-33.el6.noarch already installed and latest version
Package dos2unix-3.1-37.el6.i686 already installed and latest version
Package logwatch-7.3.6-54.el6.noarch already installed and latest version
Resolving Dependencies
--> Running transaction check
---> Package MySQL-python.i686 0:1.2.3-0.3.c1.1.el6 will be installed
---> Package altermime.i686 0:0.3.10-3.el6 will be installed
---> Package amavisd-new.noarch 0:2.9.1-2.el6 will be installed
--> Processing Dependency: perl(Net::Server) >= 0.87 for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: unzoo for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Unix::Syslog) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Razor2::Client::Version) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Net::Server) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Words) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Parser) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Head) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Entity) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Decoder::UU) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Decoder::QuotedPrint) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Decoder::NBit) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Decoder::Gzip64) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Decoder::Binary) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Decoder::Base64) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(MIME::Body) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(IO::Stringy) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(DBD::SQLite) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Convert::UUlib) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Convert::TNEF) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(BerkeleyDB) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Authen::SASL) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: perl(Archive::Zip) for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: p7zip-plugins for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: p7zip for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: nomarch for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: lzop for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: lrzip for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: freeze for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: cabextract for package: amavisd-new-2.9.1-2.el6.noarch
--> Processing Dependency: arj for package: amavisd-new-2.9.1-2.el6.noarch
---> Package clamav-db.i686 0:0.99.2-1.el6 will be installed
---> Package clamd.i686 0:0.99.2-1.el6 will be installed
--> Processing Dependency: clamav = 0.99.2-1.el6 for package: clamd-0.99.2-1.el6.i686
--> Processing Dependency: libclamav.so.7(CLAMAV_PUBLIC) for package: clamd-0.99.2-1.el6.i686
--> Processing Dependency: libclamav.so.7(CLAMAV_PRIVATE) for package: clamd-0.99.2-1.el6.i686
--> Processing Dependency: libclamav.so.7 for package: clamd-0.99.2-1.el6.i686
---> Package dovecot.i686 1:2.0.9-22.el6 will be updated
---> Package dovecot.i686 1:2.1.17-0_136.el6 will be obsoleting
---> Package dovecot-managesieve.i686 2:0.3.6-26.el6 will be installed
---> Package dovecot-mysql.i686 1:2.0.9-22.el6 will be obsoleted
---> Package dovecot-pgsql.i686 1:2.0.9-22.el6 will be obsoleted
---> Package dovecot-pigeonhole.i686 1:2.0.9-22.el6 will be updated
---> Package dovecot-pigeonhole.i686 2:0.3.6-26.el6 will be an update
---> Package fail2ban.noarch 0:0.9.4-2.el6 will be installed
--> Processing Dependency: python-inotify for package: fail2ban-0.9.4-2.el6.noarch
---> Package libwbxml.i686 0:0.11.2-4.centos6 will be installed
---> Package mcrypt.i686 0:2.6.8-10.el6 will be installed
--> Processing Dependency: libmhash.so.2 for package: mcrypt-2.6.8-10.el6.i686
--> Processing Dependency: libmcrypt.so.4 for package: mcrypt-2.6.8-10.el6.i686
---> Package nginx.i686 0:1.10.2-1.el6 will be installed
--> Processing Dependency: nginx-filesystem = 1.10.2-1.el6 for package: nginx-1.10.2-1.el6.i686
--> Processing Dependency: nginx-all-modules = 1.10.2-1.el6 for package: nginx-1.10.2-1.el6.i686
--> Processing Dependency: nginx-filesystem for package: nginx-1.10.2-1.el6.i686
---> Package perl-LDAP.noarch 1:0.40-2.el6 will be installed
--> Processing Dependency: perl(XML::SAX::Writer) for package: 1:perl-LDAP-0.40-2.el6.noarch
--> Processing Dependency: perl(Convert::ASN1) for package: 1:perl-LDAP-0.40-2.el6.noarch
---> Package perl-Mail-SPF.noarch 0:2.8.0-2.el6 will be installed
--> Processing Dependency: perl(Error) for package: perl-Mail-SPF-2.8.0-2.el6.noarch
---> Package php-common.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-fpm.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-gd.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-imap.i686 0:5.3.3-48.el6_8 will be installed
--> Processing Dependency: libc-client.so.2007 for package: php-imap-5.3.3-48.el6_8.i686
---> Package php-intl.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-ldap.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-mbstring.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-mcrypt.i686 0:5.3.3-5.el6 will be installed
---> Package php-mysql.i686 0:5.3.3-48.el6_8 will be installed
--> Processing Dependency: php-pdo(x86-32) for package: php-mysql-5.3.3-48.el6_8.i686
---> Package php-pear-Net-IDNA2.noarch 0:0.1.1-3.el6 will be installed
--> Processing Dependency: php-pear(PEAR) for package: php-pear-Net-IDNA2-0.1.1-3.el6.noarch
--> Processing Dependency: /usr/bin/pear for package: php-pear-Net-IDNA2-0.1.1-3.el6.noarch
--> Processing Dependency: /usr/bin/pear for package: php-pear-Net-IDNA2-0.1.1-3.el6.noarch
---> Package php-pecl-apc.i686 0:3.1.9-2.el6 will be installed
---> Package php-pgsql.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-xml.i686 0:5.3.3-48.el6_8 will be installed
---> Package python-beautifulsoup4.noarch 0:4.1.3-3.el6 will be installed
--> Processing Dependency: python-html5lib for package: python-beautifulsoup4-4.1.3-3.el6.noarch
---> Package python-dns.noarch 0:1.11.1-2.el6 will be installed
---> Package python-jinja2.i686 0:2.2.1-2.el6_5 will be installed
--> Processing Dependency: python-babel >= 0.8 for package: python-jinja2-2.2.1-2.el6_5.i686
---> Package python-netifaces.i686 0:0.5-1.el6 will be installed
---> Package python-sqlalchemy.noarch 0:0.5.5-3.el6_2 will be installed
---> Package python-webpy.noarch 0:0.37-2.el6 will be installed
--> Processing Dependency: python-cherrypy for package: python-webpy-0.37-2.el6.noarch
---> Package sogo.i686 0:3.2.5.20170119-1.centos6 will be installed
--> Processing Dependency: sope49-cards >= 3.2.5.20170119 for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: sope49-gdl1-contentstore >= 3.2.5.20170119 for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: gnustep-base >= 1.23 for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: sope49-sbjson for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: lasso for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: sope49-core for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: libmemcached for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: sope49-ldap for package: sogo-3.2.5.20170119-1.centos6.i686
--> Processing Dependency: sope49-appserver for package: sogo-3.2.5.20170119-1.centos6.i686
---> Package sogo-activesync.i686 0:3.2.5.20170119-1.centos6 will be installed
---> Package sogo-ealarms-notify.i686 0:3.2.5.20170119-1.centos6 will be installed
---> Package sogo-tool.i686 0:3.2.5.20170119-1.centos6 will be installed
---> Package sope49-gdl1-mysql.i686 0:4.9-20170114_1664.el6.1 will be installed
--> Processing Dependency: sope49-gdl1 for package: sope49-gdl1-mysql-4.9-20170114_1664.el6.1.i686
---> Package unrar.i686 0:5.0.3-1.el6.rf will be installed
---> Package uwsgi.i686 0:2.0.14-1.el6 will be installed
--> Processing Dependency: libyaml-0.so.2 for package: uwsgi-2.0.14-1.el6.i686
--> Processing Dependency: libjansson.so.4 for package: uwsgi-2.0.14-1.el6.i686
---> Package uwsgi-plugin-python.i686 0:2.0.14-1.el6 will be installed
--> Processing Dependency: uwsgi-plugin-common = 2.0.14-1.el6 for package: uwsgi-plugin-python-2.0.14-1.el6.i686
--> Running transaction check
---> Package arj.i686 0:3.10.22-22.el6 will be installed
---> Package cabextract.i686 0:1.5-1.el6 will be installed
--> Processing Dependency: libmspack.so.0 for package: cabextract-1.5-1.el6.i686
---> Package clamav.i686 0:0.99.2-1.el6 will be installed
---> Package freeze.i686 0:2.5.0-11.el6 will be installed
---> Package gnustep-base.i686 0:1.23.0-1 will be installed
--> Processing Dependency: gnustep-make >= 2.6.0 for package: gnustep-base-1.23.0-1.i686
--> Processing Dependency: libobjc.so.2 for package: gnustep-base-1.23.0-1.i686
---> Package jansson.i686 0:2.9-1.el6 will be installed
---> Package lasso.i686 0:2.4.0-6.el6 will be installed
--> Processing Dependency: libxmlsec1.so.1 for package: lasso-2.4.0-6.el6.i686
--> Processing Dependency: libxmlsec1-openssl.so.1 for package: lasso-2.4.0-6.el6.i686
---> Package libc-client.i686 0:2007e-11.el6 will be installed
---> Package libmcrypt.i686 0:2.5.8-9.el6 will be installed
---> Package libmemcached.i686 0:0.49-1 will be installed
---> Package libyaml.i686 0:0.1.3-4.el6_6 will be installed
---> Package lrzip.i686 0:0.616-5.el6 will be installed
---> Package lzop.i686 0:1.02-0.9.rc1.el6 will be installed
---> Package mhash.i686 0:0.9.9.9-3.el6 will be installed
---> Package nginx-all-modules.noarch 0:1.10.2-1.el6 will be installed
--> Processing Dependency: nginx-mod-stream = 1.10.2-1.el6 for package: nginx-all-modules-1.10.2-1.el6.noarch
--> Processing Dependency: nginx-mod-mail = 1.10.2-1.el6 for package: nginx-all-modules-1.10.2-1.el6.noarch
--> Processing Dependency: nginx-mod-http-xslt-filter = 1.10.2-1.el6 for package: nginx-all-modules-1.10.2-1.el6.noarch
--> Processing Dependency: nginx-mod-http-perl = 1.10.2-1.el6 for package: nginx-all-modules-1.10.2-1.el6.noarch
--> Processing Dependency: nginx-mod-http-image-filter = 1.10.2-1.el6 for package: nginx-all-modules-1.10.2-1.el6.noarch
--> Processing Dependency: nginx-mod-http-geoip = 1.10.2-1.el6 for package: nginx-all-modules-1.10.2-1.el6.noarch
---> Package nginx-filesystem.noarch 0:1.10.2-1.el6 will be installed
---> Package nomarch.i686 0:1.4-6.el6 will be installed
---> Package p7zip.i686 0:16.02-2.el6 will be installed
---> Package p7zip-plugins.i686 0:16.02-2.el6 will be installed
---> Package perl-Archive-Zip.noarch 0:1.30-2.el6 will be installed
---> Package perl-Authen-SASL.noarch 0:2.13-3.el6 will be installed
--> Processing Dependency: perl(GSSAPI) for package: perl-Authen-SASL-2.13-3.el6.noarch
---> Package perl-BerkeleyDB.i686 0:0.43-3.el6 will be installed
---> Package perl-Convert-ASN1.noarch 0:0.22-1.el6 will be installed
---> Package perl-Convert-TNEF.noarch 0:0.17-10.el6 will be installed
---> Package perl-Convert-UUlib.i686 2:1.5-1.el6 will be installed
---> Package perl-DBD-SQLite.i686 0:1.27-3.el6 will be installed
---> Package perl-Error.noarch 1:0.17015-4.el6 will be installed
---> Package perl-IO-stringy.noarch 0:2.110-10.1.el6 will be installed
---> Package perl-MIME-tools.noarch 0:5.427-4.el6 will be installed
--> Processing Dependency: perl(Convert::BinHex) for package: perl-MIME-tools-5.427-4.el6.noarch
---> Package perl-Net-Server.noarch 0:2.007-2.el6 will be installed
--> Processing Dependency: perl(IO::Multiplex) >= 1.05 for package: perl-Net-Server-2.007-2.el6.noarch
---> Package perl-Razor-Agent.i686 0:2.85-6.el6 will be installed
---> Package perl-Unix-Syslog.i686 0:1.1-3.el6 will be installed
---> Package perl-XML-SAX-Writer.noarch 0:0.50-8.el6 will be installed
--> Processing Dependency: perl(XML::Filter::BufferText) for package: perl-XML-SAX-Writer-0.50-8.el6.noarch
--> Processing Dependency: perl(Text::Iconv) for package: perl-XML-SAX-Writer-0.50-8.el6.noarch
---> Package php-pdo.i686 0:5.3.3-48.el6_8 will be installed
---> Package php-pear.noarch 1:1.9.4-5.el6 will be installed
--> Processing Dependency: php-cli >= 5.1.0-1 for package: 1:php-pear-1.9.4-5.el6.noarch
---> Package python-babel.noarch 0:0.9.4-5.1.el6 will be installed
---> Package python-cherrypy.noarch 0:3.2.2-3.el6 will be installed
---> Package python-html5lib.noarch 0:0.90-1.el6 will be installed
---> Package python-inotify.noarch 0:0.9.1-1.el6 will be installed
---> Package sope49-appserver.i686 0:4.9-20170114_1664.el6.1 will be installed
--> Processing Dependency: sope49-mime for package: sope49-appserver-4.9-20170114_1664.el6.1.i686
--> Processing Dependency: sope49-xml for package: sope49-appserver-4.9-20170114_1664.el6.1.i686
---> Package sope49-cards.i686 0:3.2.5.20170119-1.centos6 will be installed
---> Package sope49-core.i686 0:4.9-20170114_1664.el6.1 will be installed
---> Package sope49-gdl1.i686 0:4.9-20170114_1664.el6.1 will be installed
---> Package sope49-gdl1-contentstore.i686 0:3.2.5.20170119-1.centos6 will be installed
---> Package sope49-ldap.i686 0:4.9-20170114_1664.el6.1 will be installed
---> Package sope49-sbjson.i686 0:2.3.1-20170114_1664.el6.1 will be installed
---> Package unzoo.i686 0:4.4-7.el6 will be installed
---> Package uwsgi-plugin-common.i686 0:2.0.14-1.el6 will be installed
--> Running transaction check
---> Package gnustep-make.i686 0:2.6.8-1.el6 will be installed
--> Processing Dependency: gnustep-filesystem(x86-32) = 2.6.8-1.el6 for package: gnustep-make-2.6.8-1.el6.i686
---> Package libmspack.i686 0:0.5-0.1.alpha.el6 will be installed
---> Package libobjc.i686 0:4.4.7-17.el6 will be installed
---> Package nginx-mod-http-geoip.i686 0:1.10.2-1.el6 will be installed
--> Processing Dependency: libGeoIP.so.1 for package: nginx-mod-http-geoip-1.10.2-1.el6.i686
--> Processing Dependency: GeoIP for package: nginx-mod-http-geoip-1.10.2-1.el6.i686
---> Package nginx-mod-http-image-filter.i686 0:1.10.2-1.el6 will be installed
---> Package nginx-mod-http-perl.i686 0:1.10.2-1.el6 will be installed
---> Package nginx-mod-http-xslt-filter.i686 0:1.10.2-1.el6 will be installed
---> Package nginx-mod-mail.i686 0:1.10.2-1.el6 will be installed
---> Package nginx-mod-stream.i686 0:1.10.2-1.el6 will be installed
---> Package perl-Convert-BinHex.noarch 0:1.119-10.1.el6 will be installed
---> Package perl-GSSAPI.i686 0:0.26-6.el6 will be installed
---> Package perl-IO-Multiplex.noarch 0:1.13-1.el6 will be installed
---> Package perl-Text-Iconv.i686 0:1.7-6.el6 will be installed
---> Package perl-XML-Filter-BufferText.noarch 0:1.01-8.el6 will be installed
---> Package php-cli.i686 0:5.3.3-48.el6_8 will be installed
---> Package sope49-mime.i686 0:4.9-20170114_1664.el6.1 will be installed
---> Package sope49-xml.i686 0:4.9-20170114_1664.el6.1 will be installed
---> Package xmlsec1.i686 0:1.2.20-4.el6 will be installed
---> Package xmlsec1-openssl.i686 0:1.2.20-4.el6 will be installed
--> Running transaction check
---> Package GeoIP.i686 0:1.6.5-1.el6 will be installed
--> Processing Dependency: geoipupdate for package: GeoIP-1.6.5-1.el6.i686
--> Processing Dependency: GeoIP-data for package: GeoIP-1.6.5-1.el6.i686
---> Package gnustep-filesystem.i686 0:2.6.8-1.el6 will be installed
--> Running transaction check
---> Package GeoIP-GeoLite-data.noarch 0:2016.07-1.el6 will be installed
--> Processing Dependency: GeoIP-GeoLite-data-extra = 2016.07-1.el6 for package: GeoIP-GeoLite-data-2016.07-1.el6.noarch
---> Package geoipupdate.i686 0:2.2.1-2.el6 will be installed
--> Running transaction check
---> Package GeoIP-GeoLite-data-extra.noarch 0:2016.07-1.el6 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
MySQL-python i686 1.2.3-0.3.c1.1.el6 base 85 k
altermime i686 0.3.10-3.el6 epel 48 k
amavisd-new noarch 2.9.1-2.el6 epel 836 k
clamav-db i686 0.99.2-1.el6 epel 110 M
clamd i686 0.99.2-1.el6 epel 164 k
dovecot i686 1:2.1.17-0_136.el6 iRedMail 2.4 M
replacing dovecot-mysql.i686 1:2.0.9-22.el6
replacing dovecot-pgsql.i686 1:2.0.9-22.el6
dovecot-managesieve i686 2:0.3.6-26.el6 iRedMail 45 k
fail2ban noarch 0.9.4-2.el6 epel 444 k
libwbxml i686 0.11.2-4.centos6 SOGo 87 k
mcrypt i686 2.6.8-10.el6 epel 81 k
nginx i686 1.10.2-1.el6 epel 473 k
perl-LDAP noarch 1:0.40-2.el6 base 354 k
perl-Mail-SPF noarch 2.8.0-2.el6 epel 138 k
php-common i686 5.3.3-48.el6_8 updates 531 k
php-fpm i686 5.3.3-48.el6_8 updates 1.2 M
php-gd i686 5.3.3-48.el6_8 updates 110 k
php-imap i686 5.3.3-48.el6_8 updates 55 k
php-intl i686 5.3.3-48.el6_8 updates 75 k
php-ldap i686 5.3.3-48.el6_8 updates 42 k
php-mbstring i686 5.3.3-48.el6_8 updates 460 k
php-mcrypt i686 5.3.3-5.el6 epel 18 k
php-mysql i686 5.3.3-48.el6_8 updates 84 k
php-pear-Net-IDNA2 noarch 0.1.1-3.el6 epel 24 k
php-pecl-apc i686 3.1.9-2.el6 base 96 k
php-pgsql i686 5.3.3-48.el6_8 updates 74 k
php-xml i686 5.3.3-48.el6_8 updates 106 k
python-beautifulsoup4 noarch 4.1.3-3.el6 epel 134 k
python-dns noarch 1.11.1-2.el6 epel 238 k
python-jinja2 i686 2.2.1-2.el6_5 base 466 k
python-netifaces i686 0.5-1.el6 epel 12 k
python-sqlalchemy noarch 0.5.5-3.el6_2 base 1.3 M
python-webpy noarch 0.37-2.el6 epel 145 k
sogo i686 3.2.5.20170119-1.centos6 SOGo 21 M
sogo-activesync i686 3.2.5.20170119-1.centos6 SOGo 99 k
sogo-ealarms-notify i686 3.2.5.20170119-1.centos6 SOGo 11 k
sogo-tool i686 3.2.5.20170119-1.centos6 SOGo 44 k
sope49-gdl1-mysql i686 4.9-20170114_1664.el6.1 SOGo 28 k
unrar i686 5.0.3-1.el6.rf iRedMail 126 k
uwsgi i686 2.0.14-1.el6 epel 350 k
uwsgi-plugin-python i686 2.0.14-1.el6 epel 70 k
Updating:
dovecot-pigeonhole i686 2:0.3.6-26.el6 iRedMail 352 k
Installing for dependencies:
GeoIP i686 1.6.5-1.el6 epel 118 k
GeoIP-GeoLite-data noarch 2016.07-1.el6 epel 399 k
GeoIP-GeoLite-data-extra noarch 2016.07-1.el6 epel 25 M
arj i686 3.10.22-22.el6 epel 129 k
cabextract i686 1.5-1.el6 epel 41 k
clamav i686 0.99.2-1.el6 epel 4.4 M
freeze i686 2.5.0-11.el6 epel 26 k
geoipupdate i686 2.2.1-2.el6 epel 27 k
gnustep-base i686 1.23.0-1 SOGo 1.4 M
gnustep-filesystem i686 2.6.8-1.el6 epel 37 k
gnustep-make i686 2.6.8-1.el6 epel 255 k
jansson i686 2.9-1.el6 epel 35 k
lasso i686 2.4.0-6.el6 base 174 k
libc-client i686 2007e-11.el6 base 524 k
libmcrypt i686 2.5.8-9.el6 epel 94 k
libmemcached i686 0.49-1 SOGo 135 k
libmspack i686 0.5-0.1.alpha.el6 epel 62 k
libobjc i686 4.4.7-17.el6 base 92 k
libyaml i686 0.1.3-4.el6_6 base 52 k
lrzip i686 0.616-5.el6 epel 197 k
lzop i686 1.02-0.9.rc1.el6 epel 50 k
mhash i686 0.9.9.9-3.el6 epel 109 k
nginx-all-modules noarch 1.10.2-1.el6 epel 7.7 k
nginx-filesystem noarch 1.10.2-1.el6 epel 8.5 k
nginx-mod-http-geoip i686 1.10.2-1.el6 epel 14 k
nginx-mod-http-image-filter i686 1.10.2-1.el6 epel 16 k
nginx-mod-http-perl i686 1.10.2-1.el6 epel 26 k
nginx-mod-http-xslt-filter i686 1.10.2-1.el6 epel 16 k
nginx-mod-mail i686 1.10.2-1.el6 epel 44 k
nginx-mod-stream i686 1.10.2-1.el6 epel 37 k
nomarch i686 1.4-6.el6 epel 18 k
p7zip i686 16.02-2.el6 epel 728 k
p7zip-plugins i686 16.02-2.el6 epel 933 k
perl-Archive-Zip noarch 1.30-2.el6 base 107 k
perl-Authen-SASL noarch 2.13-3.el6 base 52 k
perl-BerkeleyDB i686 0.43-3.el6 epel 160 k
perl-Convert-ASN1 noarch 0.22-1.el6 base 43 k
perl-Convert-BinHex noarch 1.119-10.1.el6 base 43 k
perl-Convert-TNEF noarch 0.17-10.el6 epel 20 k
perl-Convert-UUlib i686 2:1.5-1.el6 epel 219 k
perl-DBD-SQLite i686 1.27-3.el6 base 83 k
perl-Error noarch 1:0.17015-4.el6 base 29 k
perl-GSSAPI i686 0.26-6.el6 base 64 k
perl-IO-Multiplex noarch 1.13-1.el6 epel 24 k
perl-IO-stringy noarch 2.110-10.1.el6 base 68 k
perl-MIME-tools noarch 5.427-4.el6 base 247 k
perl-Net-Server noarch 2.007-2.el6 epel 208 k
perl-Razor-Agent i686 2.85-6.el6 epel 119 k
perl-Text-Iconv i686 1.7-6.el6 base 22 k
perl-Unix-Syslog i686 1.1-3.el6 epel 28 k
perl-XML-Filter-BufferText noarch 1.01-8.el6 base 9.6 k
perl-XML-SAX-Writer noarch 0.50-8.el6 base 24 k
php-cli i686 5.3.3-48.el6_8 updates 2.2 M
php-pdo i686 5.3.3-48.el6_8 updates 79 k
php-pear noarch 1:1.9.4-5.el6 base 393 k
python-babel noarch 0.9.4-5.1.el6 base 1.4 M
python-cherrypy noarch 3.2.2-3.el6 epel 465 k
python-html5lib noarch 0.90-1.el6 epel 189 k
python-inotify noarch 0.9.1-1.el6 epel 50 k
sope49-appserver i686 4.9-20170114_1664.el6.1 SOGo 674 k
sope49-cards i686 3.2.5.20170119-1.centos6 SOGo 154 k
sope49-core i686 4.9-20170114_1664.el6.1 SOGo 253 k
sope49-gdl1 i686 4.9-20170114_1664.el6.1 SOGo 126 k
sope49-gdl1-contentstore i686 3.2.5.20170119-1.centos6 SOGo 50 k
sope49-ldap i686 4.9-20170114_1664.el6.1 SOGo 40 k
sope49-mime i686 4.9-20170114_1664.el6.1 SOGo 222 k
sope49-sbjson i686 2.3.1-20170114_1664.el6.1 SOGo 16 k
sope49-xml i686 4.9-20170114_1664.el6.1 SOGo 150 k
unzoo i686 4.4-7.el6 epel 21 k
uwsgi-plugin-common i686 2.0.14-1.el6 epel 46 k
xmlsec1 i686 1.2.20-4.el6 base 162 k
xmlsec1-openssl i686 1.2.20-4.el6 base 69 k
Transaction Summary
================================================================================
Install 112 Package(s)
Upgrade 1 Package(s)
Total size: 187 M
Total download size: 23 M
Downloading Packages:
Setting up and reading Presto delta metadata
Processing delta metadata
Package(s) data still to download: 23 M
--------------------------------------------------------------------------------
Total 134 kB/s | 23 MB 02:51
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
Installing : sope49-xml-4.9-20170114_1664.el6.1.i686 1/117
Installing : sope49-core-4.9-20170114_1664.el6.1.i686 2/117
Installing : perl-IO-stringy-2.110-10.1.el6.noarch 3/117
Installing : sope49-gdl1-4.9-20170114_1664.el6.1.i686 4/117
Installing : GeoIP-GeoLite-data-extra-2016.07-1.el6.noarch 5/117
Installing : GeoIP-GeoLite-data-2016.07-1.el6.noarch 6/117
Installing : sope49-gdl1-contentstore-3.2.5.20170119-1.centos6.i686 7/117
Installing : sope49-mime-4.9-20170114_1664.el6.1.i686 8/117
Installing : sope49-appserver-4.9-20170114_1664.el6.1.i686 9/117
Installing : sope49-ldap-4.9-20170114_1664.el6.1.i686 10/117
Installing : perl-XML-Filter-BufferText-1.01-8.el6.noarch 11/117
Installing : python-html5lib-0.90-1.el6.noarch 12/117
Installing : gnustep-filesystem-2.6.8-1.el6.i686 13/117
Installing : gnustep-make-2.6.8-1.el6.i686 14/117
install-info: warning: no info dir entry in `/usr/share/info/gnustep-faq.info'
install-info: warning: no info dir entry in `/usr/share/info/gnustep-filesystem.info'
install-info: warning: no info dir entry in `/usr/share/info/gnustep-howto.info'
install-info: warning: no info dir entry in `/usr/share/info/gnustep-userfaq.info'
Installing : perl-DBD-SQLite-1.27-3.el6.i686 15/117
Installing : perl-BerkeleyDB-0.43-3.el6.i686 16/117
Installing : perl-IO-Multiplex-1.13-1.el6.noarch 17/117
Installing : perl-Net-Server-2.007-2.el6.noarch 18/117
Installing : perl-Convert-BinHex-1.119-10.1.el6.noarch 19/117
Installing : perl-MIME-tools-5.427-4.el6.noarch 20/117
Installing : perl-Convert-TNEF-0.17-10.el6.noarch 21/117
Installing : nginx-filesystem-1.10.2-1.el6.noarch 22/117
Installing : python-babel-0.9.4-5.1.el6.noarch 23/117
Installing : 2:perl-Convert-UUlib-1.5-1.el6.i686 24/117
Installing : python-cherrypy-3.2.2-3.el6.noarch 25/117
Installing : sope49-cards-3.2.5.20170119-1.centos6.i686 26/117
Installing : clamav-db-0.99.2-1.el6.i686 27/117
Installing : python-inotify-0.9.1-1.el6.noarch 28/117
Installing : 1:perl-Error-0.17015-4.el6.noarch 29/117
Installing : perl-Mail-SPF-2.8.0-2.el6.noarch 30/117
Installing : perl-Convert-ASN1-0.22-1.el6.noarch 31/117
Installing : perl-Archive-Zip-1.30-2.el6.noarch 32/117
Installing : php-common-5.3.3-48.el6_8.i686 33/117
Installing : php-pdo-5.3.3-48.el6_8.i686 34/117
Installing : libmcrypt-2.5.8-9.el6.i686 35/117
Installing : 1:dovecot-2.1.17-0_136.el6.i686 36/117
Installing : xmlsec1-1.2.20-4.el6.i686 37/117
Installing : xmlsec1-openssl-1.2.20-4.el6.i686 38/117
Installing : lasso-2.4.0-6.el6.i686 39/117
Updating : 2:dovecot-pigeonhole-0.3.6-26.el6.i686 40/117
Installing : php-cli-5.3.3-48.el6_8.i686 41/117
Installing : 1:php-pear-1.9.4-5.el6.noarch 42/117
Installing : clamav-0.99.2-1.el6.i686 43/117
Installing : clamd-0.99.2-1.el6.i686 44/117
Installing : mhash-0.9.9.9-3.el6.i686 45/117
Installing : p7zip-16.02-2.el6.i686 46/117
Installing : freeze-2.5.0-11.el6.i686 47/117
Installing : unzoo-4.4-7.el6.i686 48/117
Installing : nomarch-1.4-6.el6.i686 49/117
Installing : p7zip-plugins-16.02-2.el6.i686 50/117
Installing : libobjc-4.4.7-17.el6.i686 51/117
Installing : gnustep-base-1.23.0-1.i686 52/117
Installing : libc-client-2007e-11.el6.i686 53/117
Installing : libwbxml-0.11.2-4.centos6.i686 54/117
Installing : sope49-sbjson-2.3.1-20170114_1664.el6.1.i686 55/117
Installing : altermime-0.3.10-3.el6.i686 56/117
Installing : jansson-2.9-1.el6.i686 57/117
Installing : libmemcached-0.49-1.i686 58/117
Installing : sogo-3.2.5.20170119-1.centos6.i686 59/117
Installing : perl-Razor-Agent-2.85-6.el6.i686 60/117
Installing : perl-Text-Iconv-1.7-6.el6.i686 61/117
Installing : perl-XML-SAX-Writer-0.50-8.el6.noarch 62/117
Installing : arj-3.10.22-22.el6.i686 63/117
Installing : geoipupdate-2.2.1-2.el6.i686 64/117
Installing : GeoIP-1.6.5-1.el6.i686 65/117
Installing : nginx-mod-http-image-filter-1.10.2-1.el6.i686 66/117
Installing : nginx-mod-http-geoip-1.10.2-1.el6.i686 67/117
Installing : nginx-mod-http-perl-1.10.2-1.el6.i686 68/117
Installing : nginx-mod-mail-1.10.2-1.el6.i686 69/117
Installing : nginx-mod-http-xslt-filter-1.10.2-1.el6.i686 70/117
Installing : nginx-1.10.2-1.el6.i686 71/117
Installing : nginx-mod-stream-1.10.2-1.el6.i686 72/117
Installing : nginx-all-modules-1.10.2-1.el6.noarch 73/117
Installing : lrzip-0.616-5.el6.i686 74/117
Installing : libmspack-0.5-0.1.alpha.el6.i686 75/117
Installing : cabextract-1.5-1.el6.i686 76/117
Installing : lzop-1.02-0.9.rc1.el6.i686 77/117
Installing : libyaml-0.1.3-4.el6_6.i686 78/117
Installing : uwsgi-2.0.14-1.el6.i686 79/117
Executing System V post-install tasks
Installing : uwsgi-plugin-common-2.0.14-1.el6.i686 80/117
Installing : perl-Unix-Syslog-1.1-3.el6.i686 81/117
Installing : perl-GSSAPI-0.26-6.el6.i686 82/117
Installing : perl-Authen-SASL-2.13-3.el6.noarch 83/117
Installing : 1:perl-LDAP-0.40-2.el6.noarch 84/117
Installing : amavisd-new-2.9.1-2.el6.noarch 85/117
Installing : uwsgi-plugin-python-2.0.14-1.el6.i686 86/117
Installing : sogo-activesync-3.2.5.20170119-1.centos6.i686 87/117
Installing : sogo-tool-3.2.5.20170119-1.centos6.i686 88/117
Installing : php-pear-Net-IDNA2-0.1.1-3.el6.noarch 89/117
Installing : fail2ban-0.9.4-2.el6.noarch 90/117
Installing : python-webpy-0.37-2.el6.noarch 91/117
Installing : python-beautifulsoup4-4.1.3-3.el6.noarch 92/117
Installing : sope49-gdl1-mysql-4.9-20170114_1664.el6.1.i686 93/117
Installing : sogo-ealarms-notify-3.2.5.20170119-1.centos6.i686 94/117
Installing : python-dns-1.11.1-2.el6.noarch 95/117
Installing : python-sqlalchemy-0.5.5-3.el6_2.noarch 96/117
Installing : php-imap-5.3.3-48.el6_8.i686 97/117
Installing : mcrypt-2.6.8-10.el6.i686 98/117
Installing : php-pecl-apc-3.1.9-2.el6.i686 99/117
Installing : 2:dovecot-managesieve-0.3.6-26.el6.i686 100/117
Installing : php-mcrypt-5.3.3-5.el6.i686 101/117
Installing : php-mysql-5.3.3-48.el6_8.i686 102/117
Installing : php-pgsql-5.3.3-48.el6_8.i686 103/117
Installing : php-ldap-5.3.3-48.el6_8.i686 104/117
Installing : php-gd-5.3.3-48.el6_8.i686 105/117
Installing : php-mbstring-5.3.3-48.el6_8.i686 106/117
Installing : php-xml-5.3.3-48.el6_8.i686 107/117
Installing : php-fpm-5.3.3-48.el6_8.i686 108/117
Installing : php-intl-5.3.3-48.el6_8.i686 109/117
Installing : python-jinja2-2.2.1-2.el6_5.i686 110/117
Installing : MySQL-python-1.2.3-0.3.c1.1.el6.i686 111/117
Installing : python-netifaces-0.5-1.el6.i686 112/117
Installing : unrar-5.0.3-1.el6.rf.i686 113/117
Cleanup : 1:dovecot-pigeonhole-2.0.9-22.el6.i686 114/117
Erasing : 1:dovecot-mysql-2.0.9-22.el6.i686 115/117
Erasing : 1:dovecot-pgsql-2.0.9-22.el6.i686 116/117
Cleanup : 1:dovecot-2.0.9-22.el6.i686 117/117
Verifying : lasso-2.4.0-6.el6.i686 1/117
Verifying : sope49-mime-4.9-20170114_1664.el6.1.i686 2/117
Verifying : perl-GSSAPI-0.26-6.el6.i686 3/117
Verifying : perl-Unix-Syslog-1.1-3.el6.i686 4/117
Verifying : perl-Archive-Zip-1.30-2.el6.noarch 5/117
Verifying : perl-Convert-ASN1-0.22-1.el6.noarch 6/117
Verifying : 1:perl-Error-0.17015-4.el6.noarch 7/117
Verifying : libyaml-0.1.3-4.el6_6.i686 8/117
Verifying : unrar-5.0.3-1.el6.rf.i686 9/117
Verifying : sope49-gdl1-contentstore-3.2.5.20170119-1.centos6.i686 10/117
Verifying : 2:dovecot-managesieve-0.3.6-26.el6.i686 11/117
Verifying : xmlsec1-1.2.20-4.el6.i686 12/117
Verifying : python-webpy-0.37-2.el6.noarch 13/117
Verifying : lzop-1.02-0.9.rc1.el6.i686 14/117
Verifying : nginx-mod-stream-1.10.2-1.el6.i686 15/117
Verifying : python-inotify-0.9.1-1.el6.noarch 16/117
Verifying : 1:dovecot-2.1.17-0_136.el6.i686 17/117
Verifying : clamav-db-0.99.2-1.el6.i686 18/117
Verifying : GeoIP-GeoLite-data-2016.07-1.el6.noarch 19/117
Verifying : amavisd-new-2.9.1-2.el6.noarch 20/117
Verifying : libmspack-0.5-0.1.alpha.el6.i686 21/117
Verifying : perl-XML-SAX-Writer-0.50-8.el6.noarch 22/117
Verifying : GeoIP-1.6.5-1.el6.i686 23/117
Verifying : lrzip-0.616-5.el6.i686 24/117
Verifying : sope49-gdl1-mysql-4.9-20170114_1664.el6.1.i686 25/117
Verifying : geoipupdate-2.2.1-2.el6.i686 26/117
Verifying : sogo-activesync-3.2.5.20170119-1.centos6.i686 27/117
Verifying : perl-Authen-SASL-2.13-3.el6.noarch 28/117
Verifying : php-ldap-5.3.3-48.el6_8.i686 29/117
Verifying : sope49-core-4.9-20170114_1664.el6.1.i686 30/117
Verifying : uwsgi-2.0.14-1.el6.i686 31/117
Verifying : sogo-tool-3.2.5.20170119-1.centos6.i686 32/117
Verifying : arj-3.10.22-22.el6.i686 33/117
Verifying : cabextract-1.5-1.el6.i686 34/117
Verifying : uwsgi-plugin-python-2.0.14-1.el6.i686 35/117
Verifying : php-common-5.3.3-48.el6_8.i686 36/117
Verifying : 1:php-pear-1.9.4-5.el6.noarch 37/117
Verifying : php-gd-5.3.3-48.el6_8.i686 38/117
Verifying : php-cli-5.3.3-48.el6_8.i686 39/117
Verifying : perl-Text-Iconv-1.7-6.el6.i686 40/117
Verifying : perl-Razor-Agent-2.85-6.el6.i686 41/117
Verifying : libmemcached-0.49-1.i686 42/117
Verifying : gnustep-base-1.23.0-1.i686 43/117
Verifying : python-netifaces-0.5-1.el6.i686 44/117
Verifying : perl-IO-stringy-2.110-10.1.el6.noarch 45/117
Verifying : php-mbstring-5.3.3-48.el6_8.i686 46/117
Verifying : xmlsec1-openssl-1.2.20-4.el6.i686 47/117
Verifying : sope49-cards-3.2.5.20170119-1.centos6.i686 48/117
Verifying : python-sqlalchemy-0.5.5-3.el6_2.noarch 49/117
Verifying : php-xml-5.3.3-48.el6_8.i686 50/117
Verifying : nginx-mod-http-image-filter-1.10.2-1.el6.i686 51/117
Verifying : php-mcrypt-5.3.3-5.el6.i686 52/117
Verifying : perl-Convert-TNEF-0.17-10.el6.noarch 53/117
Verifying : python-cherrypy-3.2.2-3.el6.noarch 54/117
Verifying : jansson-2.9-1.el6.i686 55/117
Verifying : nginx-all-modules-1.10.2-1.el6.noarch 56/117
Verifying : altermime-0.3.10-3.el6.i686 57/117
Verifying : 2:perl-Convert-UUlib-1.5-1.el6.i686 58/117
Verifying : sope49-sbjson-2.3.1-20170114_1664.el6.1.i686 59/117
Verifying : libwbxml-0.11.2-4.centos6.i686 60/117
Verifying : uwsgi-plugin-common-2.0.14-1.el6.i686 61/117
Verifying : libc-client-2007e-11.el6.i686 62/117
Verifying : libobjc-4.4.7-17.el6.i686 63/117
Verifying : php-mysql-5.3.3-48.el6_8.i686 64/117
Verifying : php-pear-Net-IDNA2-0.1.1-3.el6.noarch 65/117
Verifying : nginx-1.10.2-1.el6.i686 66/117
Verifying : php-pecl-apc-3.1.9-2.el6.i686 67/117
Verifying : p7zip-plugins-16.02-2.el6.i686 68/117
Verifying : python-babel-0.9.4-5.1.el6.noarch 69/117
Verifying : nginx-mod-http-geoip-1.10.2-1.el6.i686 70/117
Verifying : clamav-0.99.2-1.el6.i686 71/117
Verifying : sope49-gdl1-4.9-20170114_1664.el6.1.i686 72/117
Verifying : perl-MIME-tools-5.427-4.el6.noarch 73/117
Verifying : nomarch-1.4-6.el6.i686 74/117
Verifying : sogo-3.2.5.20170119-1.centos6.i686 75/117
Verifying : python-beautifulsoup4-4.1.3-3.el6.noarch 76/117
Verifying : php-imap-5.3.3-48.el6_8.i686 77/117
Verifying : python-dns-1.11.1-2.el6.noarch 78/117
Verifying : nginx-filesystem-1.10.2-1.el6.noarch 79/117
Verifying : nginx-mod-http-perl-1.10.2-1.el6.i686 80/117
Verifying : libmcrypt-2.5.8-9.el6.i686 81/117
Verifying : unzoo-4.4-7.el6.i686 82/117
Verifying : php-fpm-5.3.3-48.el6_8.i686 83/117
Verifying : clamd-0.99.2-1.el6.i686 84/117
Verifying : perl-Convert-BinHex-1.119-10.1.el6.noarch 85/117
Verifying : python-jinja2-2.2.1-2.el6_5.i686 86/117
Verifying : php-pgsql-5.3.3-48.el6_8.i686 87/117
Verifying : perl-IO-Multiplex-1.13-1.el6.noarch 88/117
Verifying : sope49-xml-4.9-20170114_1664.el6.1.i686 89/117
Verifying : perl-BerkeleyDB-0.43-3.el6.i686 90/117
Verifying : sogo-ealarms-notify-3.2.5.20170119-1.centos6.i686 91/117
Verifying : sope49-appserver-4.9-20170114_1664.el6.1.i686 92/117
Verifying : perl-DBD-SQLite-1.27-3.el6.i686 93/117
Verifying : sope49-ldap-4.9-20170114_1664.el6.1.i686 94/117
Verifying : gnustep-filesystem-2.6.8-1.el6.i686 95/117
Verifying : MySQL-python-1.2.3-0.3.c1.1.el6.i686 96/117
Verifying : python-html5lib-0.90-1.el6.noarch 97/117
Verifying : perl-XML-Filter-BufferText-1.01-8.el6.noarch 98/117
Verifying : fail2ban-0.9.4-2.el6.noarch 99/117
Verifying : mcrypt-2.6.8-10.el6.i686 100/117
Verifying : 1:perl-LDAP-0.40-2.el6.noarch 101/117
Verifying : nginx-mod-mail-1.10.2-1.el6.i686 102/117
Verifying : nginx-mod-http-xslt-filter-1.10.2-1.el6.i686 103/117
Verifying : perl-Mail-SPF-2.8.0-2.el6.noarch 104/117
Verifying : php-intl-5.3.3-48.el6_8.i686 105/117
Verifying : 2:dovecot-pigeonhole-0.3.6-26.el6.i686 106/117
Verifying : GeoIP-GeoLite-data-extra-2016.07-1.el6.noarch 107/117
Verifying : gnustep-make-2.6.8-1.el6.i686 108/117
Verifying : perl-Net-Server-2.007-2.el6.noarch 109/117
Verifying : php-pdo-5.3.3-48.el6_8.i686 110/117
Verifying : freeze-2.5.0-11.el6.i686 111/117
Verifying : p7zip-16.02-2.el6.i686 112/117
Verifying : mhash-0.9.9.9-3.el6.i686 113/117
Verifying : 1:dovecot-mysql-2.0.9-22.el6.i686 114/117
Verifying : 1:dovecot-2.0.9-22.el6.i686 115/117
Verifying : 1:dovecot-pigeonhole-2.0.9-22.el6.i686 116/117
Verifying : 1:dovecot-pgsql-2.0.9-22.el6.i686 117/117
Installed:
MySQL-python.i686 0:1.2.3-0.3.c1.1.el6
altermime.i686 0:0.3.10-3.el6
amavisd-new.noarch 0:2.9.1-2.el6
clamav-db.i686 0:0.99.2-1.el6
clamd.i686 0:0.99.2-1.el6
dovecot.i686 1:2.1.17-0_136.el6
dovecot-managesieve.i686 2:0.3.6-26.el6
fail2ban.noarch 0:0.9.4-2.el6
libwbxml.i686 0:0.11.2-4.centos6
mcrypt.i686 0:2.6.8-10.el6
nginx.i686 0:1.10.2-1.el6
perl-LDAP.noarch 1:0.40-2.el6
perl-Mail-SPF.noarch 0:2.8.0-2.el6
php-common.i686 0:5.3.3-48.el6_8
php-fpm.i686 0:5.3.3-48.el6_8
php-gd.i686 0:5.3.3-48.el6_8
php-imap.i686 0:5.3.3-48.el6_8
php-intl.i686 0:5.3.3-48.el6_8
php-ldap.i686 0:5.3.3-48.el6_8
php-mbstring.i686 0:5.3.3-48.el6_8
php-mcrypt.i686 0:5.3.3-5.el6
php-mysql.i686 0:5.3.3-48.el6_8
php-pear-Net-IDNA2.noarch 0:0.1.1-3.el6
php-pecl-apc.i686 0:3.1.9-2.el6
php-pgsql.i686 0:5.3.3-48.el6_8
php-xml.i686 0:5.3.3-48.el6_8
python-beautifulsoup4.noarch 0:4.1.3-3.el6
python-dns.noarch 0:1.11.1-2.el6
python-jinja2.i686 0:2.2.1-2.el6_5
python-netifaces.i686 0:0.5-1.el6
python-sqlalchemy.noarch 0:0.5.5-3.el6_2
python-webpy.noarch 0:0.37-2.el6
sogo.i686 0:3.2.5.20170119-1.centos6
sogo-activesync.i686 0:3.2.5.20170119-1.centos6
sogo-ealarms-notify.i686 0:3.2.5.20170119-1.centos6
sogo-tool.i686 0:3.2.5.20170119-1.centos6
sope49-gdl1-mysql.i686 0:4.9-20170114_1664.el6.1
unrar.i686 0:5.0.3-1.el6.rf
uwsgi.i686 0:2.0.14-1.el6
uwsgi-plugin-python.i686 0:2.0.14-1.el6
Dependency Installed:
GeoIP.i686 0:1.6.5-1.el6
GeoIP-GeoLite-data.noarch 0:2016.07-1.el6
GeoIP-GeoLite-data-extra.noarch 0:2016.07-1.el6
arj.i686 0:3.10.22-22.el6
cabextract.i686 0:1.5-1.el6
clamav.i686 0:0.99.2-1.el6
freeze.i686 0:2.5.0-11.el6
geoipupdate.i686 0:2.2.1-2.el6
gnustep-base.i686 0:1.23.0-1
gnustep-filesystem.i686 0:2.6.8-1.el6
gnustep-make.i686 0:2.6.8-1.el6
jansson.i686 0:2.9-1.el6
lasso.i686 0:2.4.0-6.el6
libc-client.i686 0:2007e-11.el6
libmcrypt.i686 0:2.5.8-9.el6
libmemcached.i686 0:0.49-1
libmspack.i686 0:0.5-0.1.alpha.el6
libobjc.i686 0:4.4.7-17.el6
libyaml.i686 0:0.1.3-4.el6_6
lrzip.i686 0:0.616-5.el6
lzop.i686 0:1.02-0.9.rc1.el6
mhash.i686 0:0.9.9.9-3.el6
nginx-all-modules.noarch 0:1.10.2-1.el6
nginx-filesystem.noarch 0:1.10.2-1.el6
nginx-mod-http-geoip.i686 0:1.10.2-1.el6
nginx-mod-http-image-filter.i686 0:1.10.2-1.el6
nginx-mod-http-perl.i686 0:1.10.2-1.el6
nginx-mod-http-xslt-filter.i686 0:1.10.2-1.el6
nginx-mod-mail.i686 0:1.10.2-1.el6
nginx-mod-stream.i686 0:1.10.2-1.el6
nomarch.i686 0:1.4-6.el6
p7zip.i686 0:16.02-2.el6
p7zip-plugins.i686 0:16.02-2.el6
perl-Archive-Zip.noarch 0:1.30-2.el6
perl-Authen-SASL.noarch 0:2.13-3.el6
perl-BerkeleyDB.i686 0:0.43-3.el6
perl-Convert-ASN1.noarch 0:0.22-1.el6
perl-Convert-BinHex.noarch 0:1.119-10.1.el6
perl-Convert-TNEF.noarch 0:0.17-10.el6
perl-Convert-UUlib.i686 2:1.5-1.el6
perl-DBD-SQLite.i686 0:1.27-3.el6
perl-Error.noarch 1:0.17015-4.el6
perl-GSSAPI.i686 0:0.26-6.el6
perl-IO-Multiplex.noarch 0:1.13-1.el6
perl-IO-stringy.noarch 0:2.110-10.1.el6
perl-MIME-tools.noarch 0:5.427-4.el6
perl-Net-Server.noarch 0:2.007-2.el6
perl-Razor-Agent.i686 0:2.85-6.el6
perl-Text-Iconv.i686 0:1.7-6.el6
perl-Unix-Syslog.i686 0:1.1-3.el6
perl-XML-Filter-BufferText.noarch 0:1.01-8.el6
perl-XML-SAX-Writer.noarch 0:0.50-8.el6
php-cli.i686 0:5.3.3-48.el6_8
php-pdo.i686 0:5.3.3-48.el6_8
php-pear.noarch 1:1.9.4-5.el6
python-babel.noarch 0:0.9.4-5.1.el6
python-cherrypy.noarch 0:3.2.2-3.el6
python-html5lib.noarch 0:0.90-1.el6
python-inotify.noarch 0:0.9.1-1.el6
sope49-appserver.i686 0:4.9-20170114_1664.el6.1
sope49-cards.i686 0:3.2.5.20170119-1.centos6
sope49-core.i686 0:4.9-20170114_1664.el6.1
sope49-gdl1.i686 0:4.9-20170114_1664.el6.1
sope49-gdl1-contentstore.i686 0:3.2.5.20170119-1.centos6
sope49-ldap.i686 0:4.9-20170114_1664.el6.1
sope49-mime.i686 0:4.9-20170114_1664.el6.1
sope49-sbjson.i686 0:2.3.1-20170114_1664.el6.1
sope49-xml.i686 0:4.9-20170114_1664.el6.1
unzoo.i686 0:4.4-7.el6
uwsgi-plugin-common.i686 0:2.0.14-1.el6
xmlsec1.i686 0:1.2.20-4.el6
xmlsec1-openssl.i686 0:1.2.20-4.el6
Updated:
dovecot-pigeonhole.i686 2:0.3.6-26.el6
Replaced:
dovecot-mysql.i686 1:2.0.9-22.el6 dovecot-pgsql.i686 1:2.0.9-22.el6
Complete!
里面没有类似：phpMyAdmin的安装包
因为我看一些安装教程，里面有提到：
邮件系统安装版本：iredmail_0.8.1
组件：
Apache2.2.x（webmail访问支持）
PHP 5.3.x（动态网站支持）
MySQL5.1.x（数据库，用户名存储）
OpenLDAP2.4.x（也用于用户名存储，可与Mysql之间二选一）
Postfix2.7.x ( MTA )（邮件重要组件，MTA）
Dovecot1.2.x（pop和imap的服务器，MDA）
Amavisd2.6.x（负责调用 ClamAV 对邮件进行病毒扫描，负责调用 SpamAssassin 对邮件内容进行过滤）
ClamAV0.9x(反病毒工具包）
SpamAssassin3.2.x（内容过滤，防垃圾邮件）
Policyd 1.8.x（访问控制，灰名单）
Pysieved 1.0
Roundcube0.7.2 (Webmail )
phpMyAdmin 3.3（phpMyAdmin 是一个用PHP编写的，可以通过web方式控制和操作 MySQL数据库）
phpLDAPadmin 1.2（基于Web的LDAP管理工具用于管理LDAP服务器的各个方面）
Awstats 6.9（统计工具）
。。。。。。。。。。。。。。。。
你也可以进入phpMyAdmin 来进行MysqL管理和调整
webmail和其它一些程序的入口
Webmail http://your_server/mail/ (or /webmail, /roundcube)
iRedAdmin (admin panel) https://your_server/iredadmin/
phpMyAdmin https://your_server/phpmyadmin/
phpLDAPadmin https://your_server/phpldapadmin/
Awstats https://your_server/awstats/awstats.pl?config=web (or ?config=smtp)
我只是想知道多一点而已！
随便问一下，用户在WEB登录页面里面修改不了密码，保存按钮为灰色！
轮到phpmyadmin不能打开了！
iRedMail 很早之前就出于安全考虑去掉了 phpMyAdmin。你得自己安装。但建议你试试这个替代品，更安全： http://www.adminer.org/
it 写道:轮到phpmyadmin不能打开了！
iRedMail 很早之前就出于安全考虑去掉了 phpMyAdmin。你得自己安装。但建议你试试这个替代品，更安全： http://www.adminer.org/
张工，那灰色的保存按钮如何解决？
张工，那灰色的保存按钮如何解决？
什么灰色的保存按钮？:(
it 写道:张工，那灰色的保存按钮如何解决？
什么灰色的保存按钮？:(
张工，我在服务器进入mail，然后进入密码那里，保存按钮是正常的，但在其他电脑上面是灰色的状态，不能保存修改！～
随便问一下：
那个PHP文件我下载了，不过不知道怎么用，查了资料“
安装 adminer
adminer就是一个php文件，从http://www.adminer.org/下载，放入/var/www/。比如在/var/www新建 adminer文件夹，将下载的adminer-3.5.1.php或者其他版本放入该文件夹，然后访问http://localhost /adminer/，点击php文件即可
可是出现错误！
Something has triggered missing webpage on your website. This is the default 404 error page for nginx that is distributed with EPEL. It is located /usr/share/nginx/html/404.html
You should customize this error page for your own site or edit the error_page directive in the nginx configuration file /etc/nginx/nginx.conf.
于是我把文件复制一份到/usr/share/nginx/html/下面，错误依旧，然后该目录建一个adminer文件夹，把文件复制一份到该目录，依然有错误
/var/log/nginx/error.log
2017/01/23 17:55:07 [error] 2432#0: *79 directory index of "/usr/share/nginx/html/adminer/" is forbidden, client: 192.168.50.128, server: _, request: "GET /adminer/ HTTP/1.1", host: "192.168.50.128"
该如何解决？
iRedMail 开源邮件服务解决方案 » iRedMail 技术支持 » 新装的iredmail，客户端foxmail不能发送邮件只能收取邮件！
Powered by PunBB, supported by Informer Technologies, Inc.
Currently installed 3 official extensions. Copyright © 2003–2010 PunBB.
页面生成时间 0.030 秒, 共执行查询 71 条